Printer Test Pages
13 free test pages you can print directly from your browser. No downloads or signups required.
Each test page targets a specific aspect of print output: ink density, color channel accuracy, mechanical alignment, nozzle health, text rendering, or dimensional precision. You print the pattern, compare the result to the reference on screen, and the mismatch tells you what's wrong and which part of your printer to fix.
Every page works by clicking “Print This Page” in your browser — no software to install. Five pages also have downloadable PDFs for offline use (marked below).
Which Test Page Do I Need?
Match your symptom to the right test. Each row explains what the pattern reveals.
| Symptom | Test Page | What It Tells You |
|---|---|---|
| Faded or light prints | Black & White | The grayscale gradient shows exactly where density drops off. If the 20–40% range looks washed out, you’re low on toner or ink. |
| Wrong or shifted colors | CMYK | Isolates each ink channel. If only one strip looks weak or missing, that specific cartridge is the problem — not your printer settings. |
| Streaky lines or white gaps | Nozzle Check | Fine line patterns per ink channel reveal exactly which nozzles are clogged. Inkjet printers only — laser printers don’t have nozzles. |
| Crooked or misaligned output | Alignment | The grid and crosshairs distinguish between paper feed skew (all lines angled) and printhead misalignment (vertical jagged edges). |
| Blurry or unreadable text | Text Clarity | Tests fonts at sizes from 6pt to 72pt. If large text is sharp but small text is blurry, increase your print resolution to 600 dpi or higher. |
| Photos look dull or grainy | Photo Quality | Skin tones and shadow detail are the hardest things for a printer to reproduce. Use photo paper for this test — plain paper won’t give meaningful results. |
| Borders cut off or uneven margins | Bleed & Borderless | Corner markers and edge rulers show whether your printer clips edges evenly and how close to borderless it actually gets. |
| Print comes out the wrong size | Ruler & Dimension | Measure the printed rulers with a real ruler. If they don’t match, your driver is scaling — set print scaling to 100% or “Actual Size.” |
Core Tests
The essential test pages for checking overall print quality.
Diagnostic Tests
Pinpoint specific print issues with targeted diagnostic patterns.
Color Tests
Evaluate individual color channels and tonal range.
Specialty Tests
Advanced tests for photo printing, borderless output, and dimensional accuracy.
Frequently Asked Questions
- How do I print a test page from this website?
- Open any test page and click the “Print This Page” button. In the print dialog, set quality to “Best” or “High,” set scaling to “Actual Size” or 100%, and make sure “Headers and Footers” is turned off. The test patterns use print-color-adjust: exact, so browsers print the colors faithfully even if background graphics are normally disabled.
- Do I need special paper for printer test pages?
- Plain copy paper works for every diagnostic test page. The only exception is the Photo Quality test — use glossy or matte photo paper for that one, because plain paper absorbs ink differently and won’t give you a meaningful read on color accuracy or detail reproduction.
- I have a laser printer. Which test pages apply to me?
- All of them except Nozzle Check, which is inkjet-only. The most useful for laser are Black & White (checks toner density and drum condition), Alignment (detects registration errors between color drums), and Text Clarity (laser printers excel at sharp text — if yours doesn’t, the fuser or drum may need attention).
- When should I print a test page?
- After replacing a cartridge or toner (to confirm it’s installed correctly), after running a cleaning cycle (to verify nozzles cleared), when print quality looks off (to isolate the cause), and when setting up a new printer (to establish a baseline you can compare against later).
Still Having Printer Problems?
If your test page looks fine but prints still aren't right, the issue may be in your settings, drivers, or connectivity.